ERR_CONNECTION_TIMED_OUT error in Google Chrome – how to fix it

By Rebecca

The error “ERR_CONNECTION_TIMED_OUT” is a frequent problem in Chrome. In this case, the web page does not load and the waiting time exceeds 30 seconds. If you wonder how to fix the error “err connection timed out” in Chrome? – Definitive solution.

How to fix the “ERR_CONNECTION_TIMED_OUT” error in Chrome?

When you get the error “ERR_CONNECTION_TIMED_OUT” it is not possible to load a web page from Chrome. Fortunately, there is a definitive solution to this failure to reuse the browser in an optimal way. In this sense, it is necessary to know the IP address, DNS, and the gateway of the router to proceed to manage the local network.

Next, we explain what the error err connection timed out consists of and what you must do to solve it.

What is the “ERR_CONNECTION_TIMED_OUT” error in Chrome?

ERR_CONNECTION_TIMED_OUT is a communication error that prevents accessing web pages from the Chrome browser. It is caused by a system connection failure and means that a website is not loading normally.

When the ERR_CONNECTION_TIMED_OUT error occurs, the user tries to find a certain website but time elapses without getting a response from the browser. therefore, it notifies that there is a fault and that it must be corrected.

Read more: How to use 404 error to your advantage

Why do I get the error “ERR_CONNECTION_TIMED_OUT” in Chrome?

The ERR_CONNECTION_TIMED_OUT error can occur because the server is taking a long time to process the request or after entering an invalid URL. Also, it can occur due to a bad internet connection or because the server cannot process the information that Chrome sends.

The Windows firewall can also cause this failure, as this tool can block the connection and prevent the server from issuing a response in some circumstances.

The definitive solution to the error “ERR_CONNECTION_TIMED_OUT” in Chrome

ERR_CONNECTION_TIMED_OUT: It is convenient that you follow each of the steps that we explain below in detail so that the Chrome browser works correctly again and the error err connection timed out does not appear in the future.

Read more: ERR_CONNECTION_REFUSED: Best Solutions for Chrome Error

Delete your browser data

ERR_CONNECTION_TIMED_OUT: Sometimes browsing history, cookies, and cache hampers communication with the server. For this reason, you must clean the browser from the menu (the three dots) and the “Settings” option. Immediately, you will see a new window. To the left of the panel, locate “Privacy and security.” You will see the option “Delete browsing data”, select the time interval “All” and click on the “Delete data” button.

Read more: How To Fix Google Chrome Error ERR_SPDY_PROTOCOL_ERROR

Renew the IP address

ERR_CONNECTION_TIMED_OUT: In a local network, it is essential to configure the static IP address. However, sometimes it is convenient to renew the IP address. To do this, you must locate the magnifying glass icon next to the start menu and type cmd in the text box. Then, right-click on the cmd.exe file and choose “Run as administrator” to open the command window. There, type ipconfig / flushdns and press “Enter.” Then type ipconfig / renew and finally click the “Enter” key.

Access the network properties

ERR_CONNECTION_TIMED_OUT: Once you have renewed the IP address you must go to ” Settings ” from the Windows 10 start menu. Then, you will see nine options, from which you will choose “Internet and network”“. Choose the option “Ethernet” and to the right of the panel select “Change adapter options.

” This way, you will see the network connections. Find the “Ethernet” connection and right-click on it. Select the “Properties” option and then place the cursor on the IPv4 internet protocol. Click on the “Properties” button.

Modify DNS server addresses

ERR_CONNECTION_TIMED_OUT: In the new window, check the option “Use the following DNS server addresses.” In the section “Preferred DNS server” write and in “Alternative DNS server” you must write Finally, press the “Accept” button. You can also encrypt DNS traffic to avoid being tracked and thus avoid a security problem.

Read more: The Best Counting bots to Improve Your Server

Causes of ERR_CONNECTION_TIMED_OUT error site response time exceeded

The essence of the error in question, in simplified terms, comes down to the fact that even though a connection to the server (site) can be established, no response comes from it – that is, no data is sent to the request. For some time the browser waits for a response, then – it reports an ERR_CONNECTION_TIMED_OUT error.

This can happen for a variety of reasons, the most common of which are:

  • Some kind of internet connection problem.
  • Temporary problems on the site side (if only one site does not open) or if an incorrect site address is specified (while it “exists”).
  • The use of proxies or VPNs for the Internet and their temporary inoperability (by the company that provides these services).
  • Redirected addresses in the hosts’ file, presence of malware, influence of third-party software on the Internet connection.
  • Slow or heavily loaded Internet connection.

ERR_CONNECTION_TIMED_OUT: They are not all possible causes, but it is usually any of the above. Now, in order of the steps to follow if you encounter a problem, from the simplest and most frequently triggered to the most complex.

  1. Make sure the site address is entered correctly (if you entered it from the keyboard). Disconnect the Internet, check if the cable is properly inserted (or take it out and reinsert it), restart the router if you connect via Wi-FI, restart the computer, connect to the Internet again and check if the ERR_CONNECTION_TIMED_OUT error has disappeared.
  2. If a site won’t open, check if it works from your phone over a mobile network, for example. If not, maybe the problem is with the site, just wait for it to be fixed on your part here.
  3. Disable VPN extensions or apps and proxies, check if it works without them.
  4. Check if a proxy server is not configured in Windows connection settings, disable it. See How to disable proxy server in Windows.
  5. Check the contents of the hosts’ files. If there is a line that does not start with a pound sign and contains the address of an inaccessible site, delete that line, save the file, and reconnect to the Internet. See How to edit the hosts’ file.
  6. If you have an antivirus or third-party firewall installed on your computer, try temporarily disabling them and see how it affects the situation.
  7. Try using AdwCleaner to find and remove malware and reset network settings. Download the program from the official developer page Then in the program, on the “Settings” page, set the parameters as in the screenshot below and on the “Control Panel” tab, find and remove the malware.
  8. Perform a DNS cache cleanup on your system and in Chrome.
  9. If you have Windows 10 installed on your computer, try the built-in network reset tool.
  10. Use Google Chrome’s built-in cleaning utility.

Read more: How to solve error establishing a database connection in WordPress

Also, according to some reports, in rare cases where an error occurs when accessing HTTPS sites, restarting the crypto service in services.MSc can help.

Hopefully, some of the suggested options have helped you and the problem has been fixed. If not, take a look at another material with a similar error: ERR_NAME_NOT_RESOLVED site cannot be accessed.

In case this is also of interest.




For website maintenance service contact us.

By Rebecca
Rebecca is an Independent content writer for breldigital, She writes content on any given topic. She loves to write a case study article or reviews on a brand, Be it any topic, she nails it
Leave a comment